Russian Federation
Russian Federation
Purpose: To determine the effect of malfunctions of the hydraulic vibration damper on the KVZ-TsNII passenger bogie frame. Methods: The stress-strain state of the passenger car bogie frame under the influence of static and dynamic loads has been determined by applying the Femap software package. The causes of malfunctions in hydraulic vibration dampers have been identified, with the primary cause being the accumulation of wear products in the channels, resulting from the friction of the rod against the inner surface of the cylinder. Results: The calculations have demonstrated a high degree of agreement with the operational data from the actual passenger car bogie operation, and have identified the weak points in the bogie. These are the points of the hydraulic vibration damper attachment to the bogie frame. In the event of the damper functioning correctly, the equivalent stresses in these locations do not exceed the permissible values. However, in the event of failure, cracks are formed in the bogie frame. It is imperative, therefore, to implement supplementary design solutions with the objective of enhancing the reliability of the operation of the vibration damper. Practical significance: The modification of the hydraulic vibration damper of the I and II KVZ-TsNII type bogie by the incorporation of a neodymium magnet with a diameter of 20 mm will facilitate the removal of metal shavings from the oil resulting from the friction of the rod against the cylinder walls, thereby enhancing its reliability.
Safety of operation, smooth running, hydraulic vibration damper, central cradle suspension, vibration damping
1. Strekalina R. P. Ekonomika i organizaciya vagonnogo hozyaystva / R. P. Strekalina. — M.: Marshrut, 2005. — 436 s.
2. Lukin V. V. Vagony. Obschiy kurs: uchebnik / V. V. Lukin, P. S. Anisimov, Yu. P. Fedoseev. — M.: UMC ZhDT, 2004. — 424 s.
3. Lukin V. V. Konstruirovanie i raschet vagonov / V. V. Lukin, L. A. Shadur, V. I. Hoturanov, A. A. Hohlov. — M.: UMK MPS Rossii, 2000. — 732 s.
4. Normy dlya rascheta i proektirovaniya vagonov zheleznyh dorog MPS kolei 1520 mm (nesamohodnyh). — M.: GosNIIV-VNIIZhT, 1996. — 317 s.
5. Egorov V. P. Ustroystvo i ekspluataciya passazhirskih vagonov (dlya provodnikov): ucheb. posobie / V. P. Egorov. — 2-e izd., pererab. i dop. — M.: UMK MPS Rossii, 1999. — 335 s.
6. Bykov B. V. Tehnologiya remonta vagonov: uchebnik / B. V. Bykov, V. E. Pigarev. — M.: IPK «Zheldorizdat», 2001. — 559 s.
7. Pantyuhin A. S. Spravochnik osmotrschika vagonov / A. S. Pantyuhin. — M.: Zheldorizdat, 2008. — 209 s.
8. Ustich P. A. Vagonnoe hozyaystvo / P. A. Ustich, I. I. Haba, V. A. Ivashov. — M.: Marshrut, 2003. — 560 s.
9. Chelnokov I. I. Gidravlicheskie gasiteli kolebaniy passazhirskih vagonov / I. I. Chelnokov. — M.: Transport, 1975. — 72 s.
10. Prigozhaev S. S. Analiz vliyaniya harakteristik gidravlicheskogo gasitelya kolebaniy na napryazhenno-deformirovannoe sostoyanie telezhki passazhirskogo vagona / S. S. Prigozhaev, A. A. Pyhalov, N. O. Burmakin // Sovremennye tehnologii. Sistemnyy analiz. Modelirovanie. — 2022. — № 2(74). — S. 130–141. — DOI:https://doi.org/10.26735/1813-9108.2022.2(74).130-141.
11. Treskin S. V. Analiz primeneniya gidravlicheskih gasiteley kolebaniy v konstrukciyah ressornogo podveshivaniya podvizhnogo sostava zheleznodorozhnogo transporta / S. V. Treskin, E. Yu. Dul'skiy, V. A. Kruchek, P. Yu. Ivanov // Izvestiya Peterburgskogo universiteta putey soobscheniya. — 2024. — T. 21. — № 3. — S. 598–608. — DOI:https://doi.org/10.20295/1815- 588X-2024-03-598-608.
12. Treskin S. V. Prichiny neispravnostey gidravlicheskih gasiteley kolebaniy podvizhnogo sostava zheleznodorozhnogo transporta i vozmozhnye puti sovershenstvovaniya ih konstrukcii / S. V. Treskin, E. Yu. Dul'skiy, P. Yu. Ivanov i dr. // Transport: nauka, tehnika, upravlenie. Nauchnyy informacionnyy sbornik. — 2025. — № 5. — S. 21–31. — DOI:https://doi.org/10.36535/0236-1914-2025-05-3.
