Russian Federation
Russian Federation
Russian Federation
Objective: to investigate samples of nanostructured material. This paper presents the results of laboratory tests of lubricant samples designed for open, heavy-duty friction units, aiming to compare tribological properties and abrasion resistance, as well as the results of thermal stability tests. Methods: in the course of research, it was established that the existing methods for assessing the tribological characteristics of lubricants are primarily oriented exclusively toward liquid and plastic compositions. Results: a method has been proposed for evaluating the fundamental tribotechnical and tribospectral characteristics of the material, capable of ensuring high measurement accuracy while approximating test conditions to the operational specificities of performance. Practical significance: a foundation has been laid for expanding the nomenclature and enhancing the quality of lubricants. The proposed approach offers the possibility of significantly increasing the service life of heavy-duty friction units, reducing energy consumption for mechanism operation, and extending the temperature range for the efficient performance of lubricants, while simultaneously ensuring the environmental safety of production processes through the use of accessible and safe components.
lubricant, structure, component concentration, friction surface, lubricant formulation, laboratory tests, tribotechnical pair
1. Povyshenie effektivnosti frikcionnoy sistemy «koleso — rel's» / V. V. Shapovalov [i dr.] // Vestnik Nauchno-issledovatel'skogo instituta zheleznodorozhnogo transporta. 2019. T. 78, № 3. S. 177–182. DOI:https://doi.org/10.21780/2223-9731-2019-78-3-177-182.
2. Mayba I. A., Glazunov D. V. Osobennosti mehanizma vzaimodeystviya sistemy «greben' kolesa — bokovaya gran' rel'sa» v krivoy puti // Trenie i smazka v mashinah i mehanizmah. 2015. № 6. S. 14–18.
3. Harlamov P. V. Monitoring izmeneniy uprugo-dissipativnyh harakteristik dlya resheniya zadach po issledovaniyu tribologicheskih processov v sisteme «zheleznodorozhnyy put' — podvizhnoy sostav» // Vestnik Rostovskogo gosudarstvennogo universiteta putey soobscheniya. 2021. № 1 (81). S. 122–129. DOI:https://doi.org/10.46973/0201-727X_2021_1_122.
4. Sposob modificirovaniya sistem termoplakirovaniya stal'nyh poverhnostey treniya: patent RF № RU 2750585 C1. B61K 3/02, № 2020134704 / V. V. Shapovalov [i dr.]; zayavl. 21.10.2020; opubl. 29.06.2021.
5. Kolesnikov V. I., Ozyabkin A. L., Novikov E. S. Friction wear, and monitoring of heavily loaded tribosystems: an innovative approach to studying the processes // Journal of Friction and Wear. 2019. P. 292–302. DOI:https://doi.org/10.3103/S1068366619040056.
6. Mayba I. A., Nikitin E. I., Nikitina M. I. Modelirovanie povedeniya smazochnyh materialov pri granichnom trenii metodom molekulyarnoy dinamiki // Vestnik Rostovskogo gosudarstvennogo universiteta putey soobscheniya. 2019. № 2 (74). S. 29–36.
7. Hussein Haydar A. Tverdye kompozicionnye prisadki na osnove metallizirovannogo grafita dlya plastichnyh smazochnyh materialov: diss. … kand. tehn. nauk: 05.02.04 / Institut problem mashinovedeniya RAN. Ivanovo, 2009. 156 c.
8. Dumitriu M. Modeling of railway vehicles for virtual homologation from dynamic behavior perspective // Applied Mechanics and Materials. 2013. Vol. 371. P. 647–651. DOI:https://doi.org/10.4028/www. scientific.net/AMM.371.647.
9. Evdokimov Yu. A., Kolesnikov V. I., Teterin A. I. Planirovanie i analiz eksperimentov pri reshenii zadach treniya i iznosa. M.: Nauka, 1980. 228 s.
10. Programma i metodiki issledovaniya svoystv modificirovannogo pokrytiya poverhnosti tribokontakta PP.0203.001-PM, FGBOU VO RGUPS, utverzhdeno 24.12.2018. Rostov- na-Donu, 2018. 20 s.
11. Wolter K. U., Zacher M., Slovak B. Correlation between track geometry quality and vehicle reactions in the virtual rolling stock homologation process // 9th World Congress on Railway Research. 2011. May 22–26.
